dental x-ray

Intuitive and easy selection

Intuitive and easy selection of tooth type, cone type, film / digital modes, film speed, kV, mA and patients size. 

Customizable LCD display view

LCD display view can be customized for operator preference. Built-in USB side port enables operators to import personalized screen saver photographic images or dental practice / doctor’s name for practice identification and branding. 

LCD touchscreen sub-controller

Sensitivity setting

Sensitivity setting

Select your image receptor on the screen, then suitable sensitivity setting will be selected from 16 steps automatically. 

Sensitivity setting

If the darker (or lighter) radiographs are preferred, the sensitivity setting can be adjusted manually 

Tooth density

Tooth density

Tooth density ratio settings can be adjusted from the default setting for each tooth 

Reliable DC X-ray by Belmont

Belmont’s High Frequency Technology allows for:

  • High resolution image by a small focal spot
  • Reduced skin dosage with optimum radiation level for every diagnostic need
  • Easy to position compact tube head
  • Ideal matching for digital imaging system

Standard Sub-controller

Features

Small 0.4 focal spot value
for the sharpest image possible

Blurring image

Sharply defined image

Radiation dosage

PHOT-Xlls utilizes a Direct Current (DC) generator to minimize radiation absorbed by patients.
In addition, there are 36 programmable exposure time settings between 0.01 to 2.0 seconds to fine tune the precise amount of radiation required to produce an excellent radiographic image.

Easy to positon compact tube head

The tube head is lightweight, compact and easy to hold.
This enables the operator to align the tube head accurately every time.

Realization of slim and light arm

Realization-of-slim-and-light-arm

Light head, smooth movement

Our spring arm is designed to have a good balance with load and repulsive force at any position within the movable range and make it possible to make tube head stay at any point when the hands are released. Moreover, well balanced rigidity design helps to reduce the vibration of the tube head after positioning.
These methods realize the smooth and easy positioning of the tube head.

Optimum radiation level for every patient

The operation is simple. Select patient type and tooth type, then press the exposure switch.
The exposure time can also be adjusted manually.
After the exposure, the radiation output can be displayed in the window.

Tube voltage selection

PHOT-Xlls provides 2 tube voltage settings to optimize imaging for specific purposes:

[60 kV Setting]

  • Setting provides balanced contrast for general caries diagnostic imaging.
  • Setting provides excellent definition and detail for periapical and bone structure diagnostic imaging.


[70 kV Setting]

  • Setting provides excellent diagnostic imaging for periodontal disease examination.
  • Setting provides a wider latitude and longer gray scale.

Five types of installations

  • WK Wall mounted type
  • RK Room type with stool
  • FM Mobile type with castors
  • FK Floor mounted. Sub-controller can be installed on the pole (FK1) or on the wall (FK2)
  • CK Ceiling mounted type. Dental light can be mounted on the pole as an option (CKL Type)
WK Wall mounted type
RK Room
fm-type
FM Type
fk1-type
FK1 Type
ck-type
CK Type

Options

  • Horizontal arm length of WK Type is selectable : 300 mm, 500 mm, 650 mm, 800 mm (standard) and 1000 mm
  • Ceiling pole length of CK/ CKL Type is selectable : 600 ~ 1350 mm
  • Long cone (Short cone+ Long cone collimator) for paralleling technique
  • Rectangular collimator
  • Hand exposure switch with coiled cord (Option for WK, RK, FK2 and CK. Standard for FM and FK1 .)
short-cone-long-cone-collimator
Short cone + Long cone collimator
short-cone-rectangular-collimator
Short cone + Rectangular collimator
Hand exposure switch

Dimensions

dim-ck-type

Nominal focal spot value

0.4 (IEC 60336)

Rated tube potential

60 kV / 70 kV (selectable)

Rated tube current

3 mA I 6 mA (selectable)

Rated line voltage

1 00 / 11 0 / 120 / 220 / 230 / 240 V AC 50 / 60 Hz

Rated line current
(at 70 kV / 6 mA)

•11.0 A ( 100 V) •10.5 A (110 V) •10.0 A ( 120 V)
• 6.4 A (220 V) • 6.2 A (230 V) • 6.0 A (240 V)

Line voltage range

+/-10%

Exposure time

0.01 to 2.0 sec.High Rendering LED

Total filtration

2.0 mmAI Equivalent at 70 kV

Source to skin distance (SSD)

Regular cone 203mm

Long cone (option) 305mm

Rectangular collimator (option)
SSD of cone + 40 mm

Duty cycle

1 : 30

Half value layer

1.5 mmAI over

Density preprogram

Film 16 programs

Digital Sensor 16 programs